manualshive.com logo in svg

Intermec EasyCoder E4, Programmer'S Reference Manual, Page: 76 / 122

Share
Download
Intermec EasyCoder E4 Programmer'S Reference Manual Download Page 76

EasyCoder E4 Direct Protocol v2.10 – Programmer’s Reference Manual

74

 

Chapter 9

     Advanced Features

2. Using International Character Sets, cont.

To be exact, the double-byte mapping allows an ASCII string 
to contain a mixture of single-byte and double-bytes codes. For 
example, in the BIG5 mapping, any ASCII character with value 
160 or greater is the fi rst byte of a double-byte code, while 
the remaining characters form single-byte codes. So, in BIG5, 
the ASCII string “<160><64><65>” splits into the double-byte 
code “<160><64>” and the single-byte code “<65>”. The current 
NASCD table specifi es both how to divide an ASCII string into 
single-byte and double-byte codes and also how the double-byte 
codes are mapped to unicodes. The current NASC table specifi es 
how the single-byte codes are mapped to unicodes. 

NASC

 <character set no.> | <"fi le name"> 

NASCD 

"<NASCD table fi le>"

<character set no.>  

one of the values listed in Chapter 6.11

<"fi le name"> 

one of the character set names listed in 
Chapter 6.11 or the name of a user-defi ned 
NASC table (see later in this chapter)

<NASCD table fi le> 

the fi le name of a NASCD table. 

Default:  

NASCD "" (empty string; disables double-
byte interpretation of ASCII strings)

Double-byte fonts

As discussed above, the ASCII data input to text fi elds and 
human readable parts of bar codes can contain a mixture of 
single-byte and double-byte codes, which are mapped to unicodes 
by the 

NASC

 and 

NASCD

 settings respectively. The characters 

for the single-byte codes are printed using the current single-byte 
font, as specifi ed by the 

FONT

 command (see Chapter 4.3). The 

characters for the double-byte codes are printed using the current 
double-byte font, as specifi ed by the following commands:

FONTD | FD

 "<font fi le name>" [,<font size>,<font slant>]

<font fi le name>  

the name of a Speedo or TrueType font fi le; it 
must be enclosed by double quotation marks.

<font size>  

the height of the characters in points (a point 
is equal to 1/72 in).

<font slant>  

the italic angle of the characters in degrees; a 
positive value slants the characters clockwise 
away from the vertical. Default: 0. 

Reset to default by:  

PRINTFEED|PF

Summary of Contents for EasyCoder E4



























































































































Reviews:

No comments