manualshive.com logo in svg

Intermec EasyCoder E4, Programmer'S Reference Manual, Page: 65 / 122

Share
Download
Intermec EasyCoder E4 Programmer'S Reference Manual Download Page 65

EasyCoder E4 Direct Protocol v2.10 – Programmer’s Reference Manual

 

63

 

Chapter 6

     Setting Up the Printer

The sensitivity of the LSS ( Label Stop Sensor) can be manually 
adjusted to detect gaps or black marks properly. Another way to 
do this is to issue a 

TESTFEED

 command, but that involves 

feeding out labels, which may be undesired in some cases. 

The detection range is 0-31. Increase the value to make the LSS 
more sensitive and vice versa. The present threshold value will 
be returned on the serial channel using the instruction 

PRINT

 

SYSVAR(8)

, also see Chapter 7.6.

SYSVAR (8) 

= <threshold value>

<threshold value>  

is an integer in the range of 0-31.

The standard EasyCoder E4 printers can optionally be fi tted with 
a paper cutter that can cut non-adhesive paper strip or the liner 
between labels (no cutter is presently available for the EasyCoder 
E4 LinerLess model).

As an alternative to issuing separate 

CUT

 instructions (see Chap-

ter 5.1), you can enable or disable automatic cutting in connec-
tion with each 

PRINTFEED

 operation. By default, automatic 

cutting is disabled.

The amount of media to be fed out before automatic cutting and 
be pulled back afterwards can optionally be specifi ed:

CUT

 [<feed length>] 

ON

 | 

OFF

<feed length>  

is the desired length in dots.

The 

CUT

 

ON

|

OFF

 setting is saved in the non-volatile fl ash 

memory and will therefore remain in effect even after a power 
off or reboot.

18. Setting the LSS Threshold

19. Enabling/Disabling Automatic Cutting

Summary of Contents for EasyCoder E4



























































































































Reviews:

No comments