manualshive.com logo in svg

Intermec EasyCoder E4, Programmer'S Reference Manual, Page: 64 / 122

Share
Download
Intermec EasyCoder E4 Programmer'S Reference Manual Download Page 64

EasyCoder E4 Direct Protocol v2.10 – Programmer’s Reference Manual

62

 

Chapter 6

     Setting Up the Printer

17. Printer Setup, cont.

Communication buffers

There are no setup parameters for setting the size of the input and 
output buffers of the serial channel "uart:". There are 16 buffers, 
each with a size of 492 bytes. These are shared between the input 
and output processes. 

Hence, if verbosity is disabled (SYSVAR(18)=0, see Chapter 
6.13), the input capacity is maximised. 

Setup fi les

Two commands are used to set a printer up from a setup fi le: 

SETUP

 

WRITE

 and 

SETUP

. 

Use a setup string (as described above) to set up the printer. Then 
use the 

SETUP

 

WRITE

 command to save the current printer 

setup to a fi le.

SETUP WRITE 

"<fi lename>"

<fi lename> 

the full name of the setup fi le, including 
storage area, enclosed by double quotation 
marks.

You can then select the stored setup fi le, using the 

SETUP

 

command.

SETUP

 "<fi lename>"

<fi lename> 

the full name of the setup fi le, including 
storage area, enclosed by double quotation 
marks.

Examples:

SETUP WRITE "setup1" 

↵

SETUP "setup3" 

↵

Bar Code Wand

Setting up the printer with the Bar Code Wand does not involve 
using Intermec Direct Protocol.

See the EasyCoder E4 User's Guides for details on using the Bar 
Code Wand to set up the printer.

Summary of Contents for EasyCoder E4



























































































































Reviews:

No comments