manualshive.com logo in svg

Intermec EasyCoder E4, Programmer'S Reference Manual, Page: 60 / 122

Share
Download
Intermec EasyCoder E4 Programmer'S Reference Manual Download Page 60

EasyCoder E4 Direct Protocol v2.10 – Programmer’s Reference Manual

58

 

Chapter 6

     Setting Up the Printer

By default, the Intermec Direct Protocol error handler handles 
four error conditions:
•   Out of paper
•   Head lifted
•   Out of transfer ribbon
•   Next label not found

All other errors are ignored unless specifi ed by an 

ERROR

 com-

mand.

When an error occurs, the standard IN channel is fl agged as busy 
and the Power LED changes from green to red. The message 
specifi ed for the error by the 

ERROR

 command is sent to the 

standard OUT channel. In the case of the four error conditions 
listed above, a standard message in English will be sent to the 
host computer if no other message is specifi ed by an 

ERROR

 

command.

When an error occurs, press the 

<Feed>

 button to acknowledge 

the error, then correct it, either in the setup or physically, for 
example by changing the transfer ribbon.

The 

ERROR

 command activates error-handling for the specifi ed 

error type and allows you to write an error message, which will 
be transmitted back to the host computer (according to selected 
verbosity and type of error message, see Chapters 6.13 and 6.14):

ERROR 

<error number>, "<error message>"

<error number> 

error number (see Chapter 12.1)

<error message>  

text string enclosed by double quotation 
marks. Maximum 33 characters 

Example:

ERROR 43,"MEMORY  OVERFLOW" 

↵

15. Error Handling

Summary of Contents for EasyCoder E4



























































































































Reviews:

No comments