manualshive.com logo in svg

Intermec EasyCoder E4, Programmer'S Reference Manual, Page: 48 / 122

Share
Download
Intermec EasyCoder E4 Programmer'S Reference Manual Download Page 48

EasyCoder E4 Direct Protocol v2.10 – Programmer’s Reference Manual

46

 

Chapter 5

     Feeding and Printing Commands

3. Batch Printing, cont.

Clearing the Image Buffer

The image buffer stores the bitmap pattern of the label between 
processing and printing. The image buffer can be cleared partially 
or completely using a 

CLL

 command.

CLL

 [<fi eld>%]

                                                                                                                      

<fi eld>  

the same alphanumeric designator as in the 
corresponding FIELDNO command, fol-
lowed by a mandatory % sign.

CLL  

clears the image buffer completely

CLL <fi eld>%  

clears the image buffer from the correspond-
ing FIELDNO command to the end of the 
label

Complete clearing is useful to avoid printing a faulty label after 
certain errors have occurred.

Partial clearing is used in batch printing when only part of the 
label should be modifi ed between the copies. In this case, the 

CLL

 statement must include a reference to a fi eld, that is specifi ed 

by a 

FIELDNO

 command. When a 

CLL

 command is issued, 

the image buffer will be cleared from the specifi ed fi eld to the 
end of the label.

<fi eld>% = 

FIELDNO                                                                                                        

<fi eld>  

the same alphanumeric designator as in the 
corresponding CLL command followed by a 
mandatory % sign.

Example:

FT "Swiss 721 Bold BT" 

↵

MAG 2,2 

↵

PP 100,300 

↵

PT "MONTH:" 

↵

 

(kept in the image buffer for re-use)

PP 100,200 

↵

A%=FIELDNO 

↵

PT "JANUARY":PF 

↵

 

(cleared from buffer after printing)

CLL A% 

↵

PP 100,200 

↵

PT "FEBRUARY":PF 

↵

 

(cleared from  buffer after printing)

CLL A% 

↵

PP 100,200 

↵

PT "MARCH":PF 

↵

 

(cleared from buffer after printing)

CLL A% 

↵

 

Summary of Contents for EasyCoder E4



























































































































Reviews:

No comments