manualshive.com logo in svg

Intermec EasyCoder E4, Programmer'S Reference Manual, Page: 36 / 122

Share
Download
Intermec EasyCoder E4 Programmer'S Reference Manual Download Page 36

EasyCoder E4 Direct Protocol v2.10 – Programmer’s Reference Manual

34

 

Chapter 4

     Label Design

7. Line Field

A line can be printed in right angles along or across the media 
path according to the print direction.

In addition to the general formatting commands, 

PRPOS

, 

ALIGN

, and 

DIR

, a line fi eld is specifi ed by a single command.

Set Size of the Line

The size of the line is specifi ed with regard to length and line 
weight (thickness).

PRLINE

 | 

PL

 <length>,<line thickness>

<length>  

the length of the line in dots along the 
selected direction.

<line thickness>  

the line weight in dots.

Default: 

No                                                      

Summary

To create a line fi eld, the following formatting commands must 
be given (in most cases default values may substitute missing 
parameters). Printing commands are explained in Chapter 5.2. 

Purpose Command  Default 

Remarks

X/Y Position  PRPOS | PP 

0,0 

Number of dots

Alignment 

ALIGN | AN 

1 

Select ALIGN 1- 9

Direction DIR 

1 

Select 

DIR 

1-4

Line size 

PRLINE | PL 

n.a. 

Length and line

    

thickness 

in 

dots

Example:

PP 100,100:AN 1:DIR 4:PL 200,10 

↵

  

 

 

 

Summary of Contents for EasyCoder E4



























































































































Reviews:

No comments