manualshive.com logo in svg

Intermec EasyCoder E4, Programmer'S Reference Manual, Page: 17 / 122

Share
Download
Intermec EasyCoder E4 Programmer'S Reference Manual Download Page 17

EasyCoder E4 Direct Protocol v2.10 – Programmer’s Reference Manual

 

15

 

Chapter 3

     Principles of Operation

13. File Storage Devices and File Names

Files can be stored in the EasyCoder E4 on one of fi ve devices:

•   

"ROM:"

     Contains the built-in fi les necessary for using the printer. This 

is a read-only device that resides in the fl ash memory.

•   

"RAM:"

     Contains fi les created by the user. This is a read/write device 

that resides in the fl ash memory.

•   

"CACHE:"

     Can only contain images. This device is volatile, that is, its 

contents will be lost at power off or reboot. 

•   

"CARD1:"

     A PCMCIA card in the slot nearest the ON/OFF switch, 

which can be a DOS-formatted card or a specially formatted 
font cartridge.

•   

"CARD2:"

     A PCMCIA card in the slot farthest from the ON/OFF 

switch, which can be  a DOS-formatted card or a specially 
formatted font cartridge.

The fi les in each device can be listed using the FILES command, 
for example 

FILES "RAM:"

.

In general, "ROM:" and font cartridges in "CARD1:" or 
"CARD2:" are read-only devices; you cannot create, copy, or 
delete fi les on these devices. For example. the following com-
mands 

would cause errors

:

FILE&LOAD "ROM:NEWFILE",123
COPY "RAM:OLDFILE","CARD1:NEWFILE"

 

 

 

(if CARD1: contains a font cartridge)

KILL "CARD2:OLDFILE" 

 

 

(if CARD2: contains a font cartridge)

In contrast, "RAM:", "CACHE:", and DOS-formatted cards in 
"CARD1:" or "CARD2:" are read/write devices which support 
all fi le operations.

Summary of Contents for EasyCoder E4



























































































































Reviews:

No comments