manualshive.com logo in svg

Intermec EasyCoder E4, Programmer'S Reference Manual, Page: 116 / 122

Share
Download
Intermec EasyCoder E4 Programmer'S Reference Manual Download Page 116

EasyCoder E4 Direct Protocol v2.10 – Programmer’s Reference Manual

114

 

Chapter 13

     Commands and Functions

Instruction Chapter 

Purpose

PRINT KEY OFF 

6.8 

Enables feeding of a blank label when the <Feed> button is 
pressed.

PRINTFEED (PF) 

5.2 

Prints and feeds out one or a specifi ed number of labels, 
tickets, tags, or portions of strip, according to the printer’s 
setup.

PRLINE (PL) 

4.7 

Draws a solid rectangle.

PRPOS (PP) 

4.2 

Specifes the insertion point for a line of text, a bar code, an 
image, a box, or a line.

PRSTAT 

7.7 

Returns the printer’s current status.

PRTXT (PT)  

4.9 

Provides the input data for a text fi eld, that is, a line of text.

REBOOT 

6.12 

Restarts the printer.

REMOVE IMAGE 

8.2 

Removes a specifi ed image from the printer’s memory.

SETSTDIO 

6.2 

Forces selection of standard IN and OUT communication 
channels (normally automatic).

SETUP 

6.17 

Changes the setup using a setup string or setup fi le.

SETUP WRITE 

6.17 

Creates a setup fi le containing the printer’s current setup values 
or returns the printer’s current setup to the host via "uart1:".

SYSVAR 

6.13-6.14, 6.18,  

Reads or sets various system variables.

 7.4, 

7.6-7.11 

TESTFEED 

5.1 

Slowly feeds media to allow the label stop sensor to adjust itself 
according to the presently loaded media.

TIME$ 

4.9, 6.3, 7.2 

Sets or returns the current time.

TIMEADD$ 

4.9 

Returns a new time after a number of seconds have been 
added to, or subtracted from, the current time or optionally 
a specifi ed time.

VERSION$ 

7.8 

Returns the version of the fi rmware, printer family, or type of 
CPU board.

WEEKDAY$ 

4.9 

Returns the name of the weekday for a specifi ed date.

WEEKNUMBER 

4.9 

Returns the number of the week for a specifi ed date.

1. Commands, cont.

Summary of Contents for EasyCoder E4



























































































































Reviews:

No comments