manualshive.com logo in svg

Intermec EasyCoder E4, Programmer'S Reference Manual, Page: 10 / 122

Share
Download
Intermec EasyCoder E4 Programmer'S Reference Manual Download Page 10

EasyCoder E4 Direct Protocol v2.10 – Programmer’s Reference Manual

8

Chapter 3

There is a built-in error handler, that can indicate selected error 
conditions and produce error-messages of your own creation in 
any language you like.

Variable input data (in a special format) can be inserted into fi elds 
in a predefi ned layout.

You can create counters without extensive programming.

You can easily enable the Feed key to produce printouts.

By default, verbosity is On in Intermec Direct Protocol

1

. 

Intermec Direct Protocol allows you to send commands to the 
printer in two ways:
•   Immediate Mode
•   Layout Mode

•   

Immediate Mode

     You send commands that the printer will act upon immedi-

ately. This method is used for setting up the printer, for 
returning information from the printer back to the host and 
for managing fi les, fonts and images.

     

Examples:

     

PRINT KEY ON

 

↵

 

 

(enable Feed key)

     

? DATE$

 

↵

   

 

(read printer’s calendar)

     

KILL "LAYOUT1"

 

↵

   

(delete a layout or fi le)

     Immediate Mode can also be used for creating label layouts 

including all the printable data as illustrated below.

•   

Layout Mode

     Layout Mode is only intended for creating labels. Firstly, create 

a layout containing formatting commands for a number of 
fi elds and such printable data that you do not need to change. 
Secondly, send a string of printable data to the empty fi elds 
plus a print command. You can create a number of different 
layouts, select the one you need, add the variable data, and 
print out the labels.

Principles of Operation

1. Intermec Direct Protocol Special Features

2. Sending Commands

1

/. While you are experiment-

ing with Intermec Direct 
Protocol, we recommend that 
you retain the default ver-
bosity setting (ON). Later 
you should change it to OFF, 
since this will produce opti-
mum printer performance.

Summary of Contents for EasyCoder E4



























































































































Reviews:

No comments