manualshive.com logo in svg

Intermec EasyCoder 3400e, User Manual, Page: 17 / 150

Share
Download
Intermec EasyCoder 3400e User Manual Download Page 17

HelvC

  

NugFont

  

C

39

  Getting Started

1-3

1

This chapter introduces the EasyCoder® 3400e printer and explains how to get your
new printer running for the first time.

Getting to Know Your Printer

Features of your printer include:

•

Support for direct thermal and thermal transfer printing applications. Chapters 1
and 2 explain how to load both types of media.

•

An internal optional self-strip with integral liner takeup. See Chapter 2, “Operating
the Printer,” for more information.

•

An easy-to-use software application called PrintSet. PrintSet makes configuring
your printer, downloading fonts and graphics, and printing a test label effortless.

•

Minimal supervision and maintenance.

•

Support for user-supplied fonts. You can easily download and print user-supplied
fonts. See the PrintSet software application or the IPL Programming Reference
Manual (Part No. 066396) for more information.

•

Support for TrueType. You can easily download and print TrueType fonts. See the
PrintSet software application or the IPL Programming Reference Manual for more
information.

•

e series—IEEE 1284 parallel port. Up to 8 ips (inches per second) print speed with
selected media.

Use the following figures to familiarize yourself with your printer.

Summary of Contents for EasyCoder 3400e























































































































































Reviews:

No comments