Intermec EasyCoder 301 Programmer'S Manual Download Page 107

Page: 107 / 113

106

Intermec EasyCoder 301 Direct Protocol 2.0 – Programmer's Guide Ed. 3

Chapter 13 Commands and Functions

Instruction

Chapter

Purpose

FONTS

8.1

Returns the names of all fonts stored in the printer's memory to
the standard OUT channel.

FORMAT

6.9

Formats the printer's RAM memory, or formats a RAM-type
memory card to MS-DOS format.

FORMAT DATE$

6.4

Specifies the format of the string returned by DATE$("F")
and DATEADD$(...,"F") commands.

FORMAT INPUT

6.5

Specifies separators for layout variable data entry.

FORMAT TIME$

6.4

Specifies the format of the string returned by TIME$("F")
and TIMEADD$(...,"F") commands.

FORMFEED (FF)

5.1

Activates the paper feed mechanism in order to feed out or pull
back a certain length of the paper web. If the feed length is not
specified, the printer feeds a blank label.

FRE

8.1

Returns the number of free bytes in the printer's RAM memory.

FUNCTEST$

7.3, 7.4

Performs various hardware tests on the ROM, RAM, any cards
fitted and on the printhead.

HEAD

7.4

Returns the result of a printhead check and sets printhead
resistance.

IMAGE LOAD

8.5

Receives and stores image files in .PCX format either in the file
system or in volatile memory.

IMAGES

8.1

Returns the names of all images stored in the printer's memory
to the standard OUT channel.

INPUT ON

6.1

Sets SYSVAR(18) to 0 and enables layouts and use of variable
data fields.

INPUT OFF

6.1

Restores SYSVAR(18) and disables layouts and use of variable
data fields.

INVIMAGE (II)

4.3, 4.5

Inverts the printing of text and images from “black-on-white”
to “white-on-black.

KILL

8.2

Deletes a file from the printer's RAM memory or from a DOS-
formatted memory card.

LAYOUT END

4.8

Stops the recording of a layout description and saves the layout.

LAYOUT INPUT

4.8

Starts the recording of a layout description.

LAYOUT RUN

4.9

Enables a pre-defined layout.

LTS& ON/OFF

6.7

Enables or disables the label taken sensor.

MAG

4.3, 4.5

Magnifies a font, barfont or image up to four times separately
with regard to height and width.

MAP

6.10

Changes the ASCII value of a character when received on the
standard IN channel, or optionally on another specified
communication channel.

1. Commands (Alphabetical), cont'd.

Summary of Contents for EasyCoder 301


















































































































Search results

Summary of Contents for EasyCoder 301

Reviews:

Related manuals for EasyCoder 301

Brands by name

Popular brands

Intermec EasyCoder 301, Programmer'S Manual

Search results

Summary of Contents for EasyCoder 301

Reviews:

Related manuals for EasyCoder 301

Brands by name

Popular brands