manualshive.com logo in svg

Intermec CN4, User Manual, Page: 64 / 146

Share
Download
Intermec CN4 User Manual Download Page 64

Chapter 2 — Connecting and Configuring the CN4

52

CN4 Mobile Computer User’s Manual

Hiding Menu Items in Intermec Settings

In Intermec Settings, you can hide items in the CN4 menus, or in the 
directory tree in the SmartSystems console. Hidden items are not 
saved when you back up your settings in the SmartSystems console.

In Intermec Settings in the SmartSystems console:

•

To hide menu items, right-click a menu item and choose 

Hide 

Menu Item

 from the popup list. Click 

Yes

 to clear the confirming 

message.

•

To restore menu items, click the CN4 name at the top of the 
directory tree to select it, and then choose 

View

 > 

Unhide Items

. 

All hidden menu items are restored.

In Intermec Settings on the CN4:

•

To hide menu items, tap and hold the item, and then choose 

Hide 

Menu Item

 from the popup list. Tap 

Yes

 to clear the confirming 

message.

•

To restore hidden items in a single menu, tap and hold the menu 
bar where the item was hidden, and then choose 

Restore Item 

Default

 from the popup list.

•

To restore all hidden items in all menus, tap 

Menu

 > 

Unhide All 

Items

.

Configuring the CN4 for Your Network

You can easily add the CN4 to your wireless or wired data collection 
network. You can connect your CN4 using:

•

802.11b/g radio communications.

•

Ethernet communications.

•

Bluetooth communications.

•

USB and serial communications.

Note:

 When you restore default settings in Intermec Settings, only the 

settings for visible items are restored to defaults. The settings for 
hidden menu items are not affected. For more information, see the 
SmartSystems Foundation online Help.

Summary of Contents for CN4



















































































































































Reviews:

No comments