manualshive.com logo in svg

Intermec CN4, User Manual, Page: 29 / 146

Share
Download
Intermec CN4 User Manual Download Page 29

Chapter 1 — Using the CN4

CN4 Mobile Computer User’s Manual

17

Adjusting the Volume of the Rear Speaker

The rear speaker is used for all other computer audio. You can set the 
volume to off, very low, low, medium (default), high, and very high.

Location of the Rear Speaker and Volume Control

Choose one of these methods to change the rear speaker volume.

•

Use the Volume slider to change the rear speaker volume:

a

Tap the Volume icon (

) at the top of the screen.

b

In the Volume adjust box, tap 

On

.

c

Use your stylus to move the volume slider for the rear speaker.

•

Press the side volume button to change the volume:

•

Press the top to turn the volume up.

•

Press the bottom to turn the volume down.

•

Use Intermec Settings to set the default volume. For help, see 

“Configuring the CN4 Parameters” on page 48.

Rear speaker

Volume up/down

Rear speaker
volume slider

Summary of Contents for CN4



















































































































































Reviews:

No comments