manualshive.com logo in svg

Intermec CN4, User Manual, Page: 109 / 146

Share
Download
Intermec CN4 User Manual Download Page 109

Chapter 4 — Troubleshooting and Maintaining the CN4

CN4 Mobile Computer User’s Manual

97

•

Tap Mark to place an arrow marker above the graph.

8

Tap the 

Conf

 tab to set up a log file that lists RSSI history.

This screen includes the 802.11 radio driver version and available 
radio modes.

To create a log file:

a

Check the 

Log to File

 check box.

b

(Optional) Change the sample period and number of samples 
displayed.

c

Tap 

Log File

. The Save As screen appears.

d

(Optional) Change the name of the saved log file, the folder to 
which the file will be saved, the content type (log or text), and 
the location.

e

Tap 

Save

.

Resetting the CN4

You rarely need to reset the computer. If the computer does not 
resume after pressing the 

Power

 button, or if the computer or an 

application locks up, you may need to reset the CN4. The CN4 uses 
the configuration currently saved in flash memory during the boot 
process. There are three ways to reset the CN4:

•

Warm booting the CN4

•

Cold booting the CN4

Summary of Contents for CN4



















































































































































Reviews:

No comments