Intermec CK3a, User Manual

Page: 44 / 126

Chapter 2 — Connecting and Configuring the CK3
34 CK3 Mobile Computer User’s Manual
Configuring Bluetooth Communications for Wireless
Printing
To configure your CK3 for Bluetooth wireless printing, you need to:
• make sure Bluetooth power is on. For help, see the procedure in
“Configuring Bluetooth Communications” on page 32 .
• create an application that opens the wireless printing COM port
on your CK3. For help, see the Bluetooth Resource Kit, part of the
Intermec Developer Library (IDL), available from the Intermec
web site at
www.intermec.com/idl .
• select the current wireless printer on the CK3. For help, see the
next procedure.
To select the current wireless printer
1 Select Start > Settings > the System tab > Wireless Printing .
2 Tap Search to find a printer, or tap Manual to enter a device
address. Follow the onscreen instructions to select the current
wireless printer.
3 (Optional) Tap Print Test Page . The printer prints out the test
page.
Note: You can also print wirelessly using Microsoft APIs with
Bluetooth extensions for Winsock and Bluetooth virtual COM ports.
For help, see the IDL.