Intermec 502O, User Manual

Page: 244 / 402

5020 Data Collection PC User’s Manual Nugg
Co d e 39
8-42
Display Backlight Level
Purpose: Defines the intensity of the backlight on the 5020 screen. You can set the intensity to
either high or low.
Configuration: Use one of these methods:
Configuration
Applications
SNMP Bar Codes
Yes Yes No
In the Configuration or Unit Management application, choose Configure and then Unit.
Next, choose Display and then choose Backlight Level. For help, see Chapter 3,
“Configuring the 5020.”
On Cold Boot: Not saved
SNMP OID: 1.3.6.1.4.1.1963.15.501.4.1.0
Options: Acceptable values for the backlight level are:
0 Low
1 High
Default: High
Display Backlight Timeout
Purpose: Defines the amount of time the backlight remains on. The backlight timeout setting
significantly affects the 5020’s battery life. If you set a longer backlight timeout value,
you will use the power in the main battery pack at a faster rate.
You can use the Configuration application, the Unit Management application, or the
Display applet in the Control Panel to set the Display Backlight Timeout parameter. In
the Configuration or Unit Management applications, the value you set will turn off the
backlight when you are using it on battery power or on AC power. In the Control Panel,
you can set separate values to turn off the backlight when it is on battery power or on
AC power. For help, see Chapter 4, “Customizing the 5020 Using the Control Panel.”
Configuration: Use one of these methods:
Configuration
Applications
SNMP Bar Codes
Yes Yes Yes