FL300MSW Instruction Manual
Two Head Flood Light with Motion Sensor
WARNING: Risk of Electric Shock
• If you are not experienced with proper wiring practices, consult a qualified electrician.
• All wiring must comply with local and national electrical codes.
• Before wiring ensure power is turned off at the fuse box or circuit breaker panel.
Technical Specifications
Housing Size (H x W x D)
3 1/2” X 2 4/5” X 4 1/2”
Supply Voltage
120 V / 60Hz
Switching Capacity
Maximum 300 Watts
Detection Angle of Sensor
140˚ Horizontal / Plane A (10 zones)
Sneak-by Guard
90˚ Horizontal / Plane B (6 zones)
8˚ Vertical
Swiveling range of sensor
130˚ Horizontal, 65˚ Vertical
Range over which detection is
270˚ Horizontal
adjustable
“On” time:
10 seconds to 15 Minutes, adjustable
Sensor Range
Minimum 40’ in front, 23 Feet at sides (based on 10’
mounting height)
Type of enclosure
Rain tight
Lamps (not included)
Maximum 150 Watt Par 38 or Quartz flood lamps
PL fluorescent flood with low temp start
Installation
Wall mount or soffit/eave mount applications
