ET170 SERIES EASY-SET BASIC PROGRAMMING
RESET TIME SWITCH:
1. Place the two position switch to
CLK
and the three position
switch to
AUTO
.
2. Depress the
RESET
switch for 3-5 seconds to reset the
microprocessor memory and clear all programming
information. The display will flash 12:00 AM.
NOTE
: Do not press the
RESET
switch after programming has begun
or you will loose all of your programmed information.
TO SET PRESENT TIME AND DAY OF WEEK
:
1. Place the two position switch to
CLK
and the three position
switch to
PROGRAM
.
2. Press the
HOUR
,
MIN
, and
DAY
buttons individually to select
the current time of day and current day of week. (day 1 is
Sunday, day 2 is Monday, etc.)
3. Place the three position switch to
AUTO
. The display should
now show the current time of day and current day of week.
TO PROGRAM TIMES
:
1. Place the two position switch to
OUTPUT
and the three
position switch to
PROGRAM
.
2. To enter the first ON set point, depress the
DAY
button to
select the day the event will occur.
3. Press the
HOUR
and
MIN
buttons individually to program the
first ON event. The ON will flash.
4. Press the
ENTER
button to enter that set point and the ON will
stop flashing indicating acceptance. If this ON set point is to
occur on other days of the week, press the
DAY
button to
select the next day and then press
ENTER
. Repeat for
additional days.
5. To enter the first OFF set point, overwrite the ON time with the
OFF time (
HOUR
and
MIN
) desired, the ON will flash.
6. Press the
ON/OFF
button once to toggle the flashing ON to a
flashing OFF.
7. Press
ENTER
to enter that set point and the OFF will stop
flashing indicating acceptance. If this OFF set point is to occur
