P/N 1073436-EN
• REV
D
• ISS 21SEP18
1 / 2
TVP
-CCBWM Compact Cup Base PTZ Wall
Mount
Installation Instructions
Specifications
Dimensions
:
183.47
× 120 ×
314.41
mm (7
.22
×
4.72
×
12.38 in.
)
Weight:
1120 g (3.57 lbs.)
Accessories
:
Expansion anchor
s: 4 pcs
Used to install the TVP
-
CCBWM wall mount to the mounting
surface.
Screw A: 4 pcs
Used to install the mounting plate
to the TVP
-CCBWM wall
mount
.
Supported cameras
The
compact cup
b
ase PTZ wall mount
can be used with
following cameras:
IP Compact
PTZ
Camera
:
TVP
-
51
03
Installation
To install the TVP-5103 PTZ camera to a mounting surface
using the TVP-CCBWM wall mount:
1
.
Using the Torx wrench that is supplied with the PTZ,
loosen the Torx
screw at the base of the PTZ.
Loosen slightly the three screws/standoffs
on the base of
the PTZ camera and rotate the metal
adapter plate
counterclockwise to separate it from the
PTZ camera.
Open
2
.
Place the metal PTZ adapter plate on the cup base wall
mount. The arrow that states FRONT should be pointing
away from the base of the wall mount. Using
s
crew A,
secure the adapter plate to the wall mount.
Tighten screw
A fully. Otherwise, the dome will not slide properly into
place over the three
standoffs, and the screw head will
block the rotation.
3
.
Use the wall mount base to mark the holes for the
expansion anchors
and to also
provide access for the
cable harness prior to installing with the
mount
.
4
.
Secure the wall mount to the mounting surface using the
expansion anchors.
