8 IFS NS3552-8P-2S and NS3550-2T-8S Quick Installation Guide
6. Configure IP address
The Managed Industrial Switch is shipped with the default IP address as
following.
IP Address:
192.168.0.100
Subnet Mask:
255.255.255.0
To check the current IP address or modify a new IP address for the
Managed Industrial Switch, please use the procedures as follow:
The current IP address is displayed.
1. On
“
NS3552-8P-2S:/IP>
” prompt, enter
“configuration”.
2.
The screen displays the current IP address, Subnet Mask and Gateway.
As
show in Figure 6-1.
Figure 6-1
Show IP information screen
Configure IP address
3. On
“
NS3552-8P-2S: /IP>
” prompt, enter the following command and press
<Enter>.
As show in Figure 6-2.
NS3552-8P-2S:/IP>setup 192.168.1.100 255.255.255.0 192.168.1.1 1
The previous command would apply the follow settings for the Switch.
IP: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
VLAN ID: 1
