Home
/
Interlogix
/
NS3503-16P-4C
/
User Manual

Interlogix NS3503-16P-4C, User Manual, Page: 93 / 316

Share

Page: 93 / 316

Interlogix NS3503-16P-4C User Manual Download Page 93

91

NS3503-16P-4C User Manual

4.4.5 LACP Port Setting

This page is used to configure the LACP port setting. The LACP Port Setting screens in Figure 4-4-10

and Figure 4-4-11 appear.

Figure 4-4-10 LACP Port Setting Page Screenshot

The page includes the following fields:

Object

Description

Port Select

Select port number for this drop down list to set LACP port setting.

Priority

The Priority controls the priority of the port.

If the LACP partner wants to form a larger group than is supported by this
device, then this parameter will control which ports will be active and which
ports will be in a backup role.

Lower number means greater priority.

Timeout

The Timeout controls the period between BPDU transmissions.

Short will transmit LACP packets each second, while Long will wait for 30
seconds before sending an LACP packet.

Buttons

: Click to apply changes.

Figure 4-4-11 LACP Port Information Page Screenshot

«
...
91
92
93
94
95
...
»

Summary of Contents for NS3503-16P-4C





























































































































































































































































































































Reviews:

No comments