Interlogix NS3503-16P-4C User Manual Download Page 206

Page: 206 / 316

NS3503-16P-4C User Manual

204

4.9.5 Access

This section is to control the access of the Managed Switch, including the different access methods –

Telnet, SSH, HTTP and HTTPs.

4.9.5.1 Telnet

The Telnet Settings and Information screen in Figure 4-9-21 and Figure 4-9-22 appear.

Figure 4-9-21 Telnet Settings Page Screenshot

The page includes the following fields:

Object

Description

Telnet Service

Disable or enable telnet service

Select login authentication list for this drop down list

Enable Authentication List

Select enable authentication list for this drop down list

Session Timeout

Set the session timeout value

Password Retry Count

Set the password retry count value

Silent Time

Set the silent time value

Buttons

: Click to apply changes

: Click to disconnect telnet communication

Summary of Contents for NS3503-16P-4C





























































































































































































































































































































Search results

Summary of Contents for NS3503-16P-4C

Reviews:

Interlogix NS3503-16P-4C, User Manual, Page: 206 / 316

Search results

Summary of Contents for NS3503-16P-4C

Reviews: