Interlogix NS3503-16P-4C User Manual Download Page 181

Page: 181 / 316

179

NS3503-16P-4C User Manual

4.8.4 Rate Limit

Configure the switch port rate limit for the switch port on this page.

4.8.4.1 Ingress Bandwidth Control

This page provides to select the ingress bandwidth preamble. The Ingress Bandwidth Control Setting

and Status screens in Figure 4-8-16 and Figure 4-8-17 appear.

Figure 4-8-16 Ingress Bandwidth Control Settings Page Screenshot

The page includes the following fields:

Object

Description

Port

Select port number for this drop down list

State

Enable or disable the port rate policer. The default value is "Disabled".

Rate (Kbps)

Configure the rate for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1000000.

Buttons

: Click to apply changes.

Figure 4-8-17 Ingress Bandwidth Control Status Page Screenshot

The page includes the following fields:

Object

Description

Port

The switch port number of the logical port

Ingress Rate Limit (Kbps)

Display the current ingress rate limit

Summary of Contents for NS3503-16P-4C





























































































































































































































































































































Search results

Summary of Contents for NS3503-16P-4C

Reviews:

Interlogix NS3503-16P-4C, User Manual, Page: 181 / 316

Search results

Summary of Contents for NS3503-16P-4C

Reviews: