Interlogix NS3503-16P-4C User Manual Download Page 111

Page: 111 / 316

109

NS3503-16P-4C User Manual

4.5.10 GVRP Setting

GARP VLAN Registration Protocol (GVRP) defines a way for switches to exchange VLAN information in

order to register VLAN members on ports across the network.

VLANs are dynamically configured based on join messages issued by host devices and propagated

throughout the network. GVRP must be enabled to permit automatic VLAN registration, and to support

VLANs which extend beyond the local switch.

The GVRP Global Setting/Information screens in Figure 4-5-13 and Figure 4-5-14 appear.

Figure 4-5-13 GVRP Global Setting Page Screenshot

Summary of Contents for NS3503-16P-4C





























































































































































































































































































































Search results

Summary of Contents for NS3503-16P-4C

Reviews:

Interlogix NS3503-16P-4C, User Manual, Page: 111 / 316

Search results

Summary of Contents for NS3503-16P-4C

Reviews: