8 IFS MC251-4P/1S and NS2051-4P/1T User Manual
1 2 3 4 5 6
Power 1
Fault
Power 2
- + - +
Wiring the Fault Alarm Contact
The fault alarm contacts are in the middle of the terminal block
connector as the picture shows below. Inserting the wires, the
MC251-4P/1S and the NS2051-4P/1T will detect the fault
status of the power failure and then forms an open circuit. The
following illustration shows an application example for wiring
the fault alarm contacts.
1 2 3 4 5 6
Insert the wires into the fault alarm contacts
