Interlogix ATS1500A-IP-LP, Installation And Programming Manual

Page: 190 / 376

Chapter 5: Menu reference
184 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
4.1.n.7.2 Sensor type
2>Sensor type
DWS
The screen allows you to view the sensor type. The following sensor types are
available:
Table 26: Wireless sensor types
Type
Description ID
Repeater Wireless signal repeater 0A*
CO Carbon monoxide sensor 0D*
DWS Door/Window sensor 10*
Smoke sensor Smoke sensor 11*
PIR Passive infrared detector 12*
2 button panic 2 button panic sensor 14*
Shock sensor Shock sensor 18*
Sound sensor Glass break sound sensor 1A*
PIR camera sensor Wireless PIR camera 23*
4.1.n.7.3 Sensor mode
3>Sensor mode
Single
The informational screen allows you to see if the sensor operates in two-zone
mode. The following values are available:
• Single: Single zone sensor.
• Master: The selected zone is the first zone of a two-zone sensor.
• Slave: The selected zone is the second zone of a two-zone sensor.
See “Two-zone RF sensors” on page 96 for more details.
4.1.n.7.4 Supervision
3 Supervision
>Off<
Enables or disables the wireless device supervision. Supervision of all types
becomes active. See “2.2.2.n.4.4 Supervision” on page 153 for more details.
4.1.n.7.5 Sensor opt
4 Sensor opt
>Ignore alarm<
Sensor options depend on the type of the wireless device.
See an appropriate RF device manual for more information on available options.