2
Installation and programming
© 2021 Interflex Datensysteme GmbH
IF-261 Cabinet Lock
8
Door
frames
Angle
brackets
Spacer plates
Variable spacer plate
Door
Installation of Cabinet Lock on metal door 2
2.3 Measurement and calculation
To install the cabinet lock, you will need different spacer plates, locking blocks, flange extensions and
screws, depending on local conditions.
1. Measure spacing between the inside of the door and the bolt stop, e.g. using the depth measuring
stick of a slide caliper gauge
2. Measure the thickness of the door or the door panel
3. Refer to the table for the required number of spacer plates and appropriate locking blocks
Inside of the door up to the bolt stop [mm]
Spacer plate [mm]
Locking block
0.0 to 5.95
None
4
6.05 to 7.25
None
3
7.35 to 8.85
None
2
8.95 to 10.45
None
1
10.55 to 10.95
5
4
11.05 to 12.25
5
3
12.35 to 13.85
5
2
13.95 to 15.45
5
1
15.55 to 15.95
2 × 5
4
