Polimerizator AQUAMAT GB
4
2.
SAFETY INSTRUCTIONS
The following instructions must be observed in order to avoid personnel injury or
equipment failure.
•
the device must not be run by an operator who is not familiar with these instructions;
•
before you plug in the device check if the voltage in the electrical network corresponds
to the working tension. In case of discrepancy, consult a specialist;
•
on no account should the device be altered;
•
the notices and stickers must be kept in good condition so that they are easily readable;
they should not be removed!
•
the unit must not function in case of being damaged and in position to injure the staff or
a third person;
•
keep the power cable out of heat, oil and coarse objects; while moving the cable do not
make contact with the device.
•
switch off the device and pull out the feeder cable plug from the power socket before
each cleaning or upkeep.
•
spare parts which are not specified by the manufacturer must not be used!
•
keep from falling and hitting;
•
to accomplish its functions the device must be heated so bear in mind the possible
dangers of explosion or emissions of toxic or combustible gas as a result of the heating of
materials in the device itself. Therefore, the unit is recommended to be placed in a
suitable ventilated spot in the premises.
If the unit is used by means not indicated by the manufacturer, the provided protection can worsen!
WARRNING!
