Package
MCP-501T
MCP-501R
MCP-501TL
MCP-501RL
Quick Start
Guide
Grounding Method
Î
When connecting the product to the ground, connect it to
the dedicated ground line. DO NOT connect the ground to
water pipes, gas piping or heating piping.
Hardware Overview
Top
Power
Eth. Link
Join Link
PoE
Right
Left
상태 표시등
ETHERNET
M12 D-code 4P
제품 고정 나사용 홀
접지단자용 홀
COAX : BNC (No Analog camera)
Status LED Indicators
Î
Connect only PoE-supported products to Ethernet(M12) port
of the MCP-501T. If it is not a PoE product, the product may
be damaged due to electric shock.
Top
Power
Eth. Link
Join Link
PoE
Right
Left
상태
표시등
ETHERNET
M12 D-code 4P
제품
고정
나사용
홀
접지단자용
홀
COAX : BNC (No Analog camera)
Ground Terminal Hole
Mounting Screw Hole
Overview
MCP-501 is Ethernet / PoE over Coax converter that
transmits the network data and PoE power over coaxial cable
simultaneously.
It is cost-effective and time saving solution to migrate existing
analog system to IP based system utilizing the existing coax
cable infrastructure.
This is an industrial product made in accordance with the IP65
standard of waterproofing and railway certification standards.
Features
Long range Ethernet over Coax communication following
IEEE1901 Standard
Network data and PoE over Coax (PoC, PoE)
Max. 95Mbps Bandwidth (Max. 270Mbps between MCP-501)
10/100 Full Duplex Ethernet Communication
M12 4 pin standard interface
IEEE802.3 at/af standard PD(Rx only)/PSE(Tx only).
Reliability based on railway certification standards and
industrial environments
IP65 water resistance
MCP-501T / MCP-501R
MCP-501TL / MCP-501RL
Quick Start Guide
Please read carefully the instruction manual before use.
Depending on the model, the image
and the actual look of the product may vary.
[Rev.1.0]
