Package
HPS-1008
Adapter
Bracket
Quick Start Guide
Overview
The HPS-1008 is 8 + 2 port Gigabit Hybrid PoE+ Switching
Hub that transmits 1Gbps Ethernet and supports PoE+ (up to
25.5W).
Using HPS-01 (2 Port Hybrid PoE Switch), the device supports
100Mbps Ethernet transmission and PoE+ power supply up
to 250 meters and it is possible to connect multiple devices in
cascade mode.
With dual DC inputs supply secured PoE+ power up to 25.5W by
each port and can also be used redundancy power source.
Optional 19" rack mount is available for easy installation.
Features
Gigabit 8+2 port PoE Switch
- Downlink: 8 x RJ45 - Uplink: 2 x RJ45
10/100/1000 Ethernet (Full Duplex)
Extended Ethernet (100Mbps) distance up to 250 m
(With HPS-01, 2 port Hybrid PoE Switch)
Cascade configuration
(With the HPS-01: 2 port Hybrid PoE Switch)
PoE, PoE+ output up to 25.5W
Over current protection for secured power supply
Surge Protection
Dual DC adapter inputs
Compact Hybrid Switch Design
Optional 19" Rack mount
Hardware Overview
LINK PoE
LINK PoE
LINK PoE
LINK PoE
LINK PoE
LINK PoE
LINK PoE
LINK PoE
10/100 1000
10/100 1000
Up Link
PWR A
PWR B
Hybrid Gigabit 8-port PoE Switch (802.3af/at)
DC 57V
① RJ45 포트
② RJ45 Unlink 포트
③ DC IN (DC 57V)
① RJ45 Port
② RJ45 Unlink Port
③ DC IN (DC 57V)
1.
10/100/1000 Base-T Ethernet port / 8 Port PoE + (IEEE802.3at / Max. 25.5W Output)
PoE LED lights up when the device outputs PoE to the end-device and Link LED flickers when the data linked.
If PoE LED flickers, the current is above the rating.
If PoE LED is OFF, please use appropriate product as it is out of PoE range which HPS-1008 may cover.
If the end-device doesn't support PoE, power supply is interrupted and the device can be used for data communication only.
2.
10/100/1000 Base-T Ethernet Uplink Port
The connection speed of the Uplink port is displayed as link LED 10/100 or 1000.
3.
DC Input port (Max. 57VDC input)
2 power supplies are applicable for installing the HPS-1008. (The same model of the power supplies are recommended)
If the voltage differs between the two power supplies at the same time, only high voltage input power is used. And the only Power LED
which is used is ON.
When power is supplied from two input power sources at the same time, power LEDs (2) for each ports are turned on. (When using 2
power inputs, it is recommended to use the power adapter with 0.4V or less output voltage difference.
HPS-1008
Quick Start Guide
Please read carefully the instruction manual before use.
Depending on the model, the image
and the actual look of the product may vary.
[Rev.1.0]
