Package
FLX-11T (Transmitter)
FLX-11R (Receiver)
Bracket
Quick Start
Guide
Hardware Overview
Right
Left
57V DC
Bracket
PWR
LINK/ACT
Ethernet
LINK/ACT
PoE
Bracket
상태 표시등
DC 전원 어댑터
상태 표시등
LINK/ACT
PoE
상태 표시등
RJ-45
RJ-45
Status LED Indicator
LINK/ACT
Status LED Indicator
PoE
DC Power Jack
Status LED Indicator
Overview
FLX-11 Series are High-Speed, long reach Ethernet & PoE extender
that makes possible to transmit the Ethernet signal and PoE up to
500m through UTP(Cat 5e or better)cable.
It is cost-effective and time saving solution to migrate existing
analog system to IP based system since FLX-11 series support easy
installation utilizing the existing UTP cable or UTP bundle cables.
With long reach transmission feature, the device makes to overcome
100 meters distance limitation easily and reduces the construction
cost significantly compared with fiber optic configuration.
Features
Long reach Ethernet & PoE extension over existing
UTP(Cat 5e or better) cable
Data + Power over UTP(Cat 5e or better) cable
Data and PoE distance up to 500 m
100Mpbs Full Duplex
Support PoE, PoE+ PSE output to PoE Camera.
(FLX-11T model only)
Support PoE, PoE+ PD input (25.5W) from PoE Switch / PoE NVR
(FLX-11R model only)
Multicast supported
LED Indication (Data, Power)
Plug & Play
Surge Protection
Compact design
Quick Start Guide
FLX-11T / FLX-11R
Please carefully read the instruction manual before use. Depending
on the model, the image and the actual look of the product may vary.
* Please visit our website
www.intercoax.com
to download Manual.
Installation Guide
1. Connect UTP cable (Cat5e or better) from PoE Switch/NVR to
FLX-11R(Ethernet). Check LEDs on FLX-11R.
Ethernet cable
(Cat5e or better)
Ethernet cable
(Cat5e or better)
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
2. Connect UTP cable (Cat5e or better) from FLX-11R(Flexia) to
FLX-11T(Flexia).
Ethernet cable
(Cat5e or better)
Ethernet cable
(Cat5e or better)
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
3. Connect UTP cable (Cat5e or better) from FLX-11T(Ethernet) to IP
Camera (PoE Model Only). Check LEDs on FLX-11T.
Ethernet cable
(Cat5e or better)
Ethernet cable
(Cat5e or better)
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
Rev.1.0
LED Indicators
Indicator
Color
Function
PWR
DC Link (PoE or DC Power adapter)
LINK/ACT
On/Blinking : Data Link/Act ( UTP Flexia Line)
LINK/ACT
On/Blinking : Data Link/Act ( Ethernet Line )
PoE
PoE Output On
