Package
ETP-01T (Transmitter)
ETP-01R (Receiver)
Quick Start
Guide
Hardware Overview
Right
Left
Top
상태
표시등
DATA
상태
표시등
PWR
RJ45
DC
전원
어댑터
Teminal 커넥터
제품
고정
나사용
홀
제품
고정
나사용
홀
Status LED Indicator
DATA
Status LED Indicator
PWR
DC Power Jack
Teminal connector
Mounting
Screw Hole
Mounting
Screw Hole
Overview
ETP-01 Series are High-Speed, long distance Ethernet & PoE extender
that makes possible to transmit the Ethernet signal and PoE up to
300m through single pair of twisted wires.
It is cost-effective and time saving solution to migrate existing
analog system to IP based system since ETP-01 series support easy
installation utilizing the existing UTP bundle cables or any single
twisted pair cables.
With long distance transmission feature, the device makes to
overcome 100 meters distance limitation easily and reduces the
construction cost significantly compared with fiber optic configuration.
Features
Long reach Ethernet & PoE extension over existing 2-Wire twisted
cable
Data + Power over twisted cable
Data and PoE distance up to 300 m
100Mpbs Full Duplex
PoE, PoE+, Extra PoE (Max. 60W PoE output, ETP-01T model only
with DC Power adapter)
LED Indication (Data, Power)
Plug & Play
Surge Protection
Support PoE, PoE+ Input (25.5W) from PoE Switch / PoE NVR
(ETP-01R model only)
Slim design
Quick Start Guide
ETP-01T / ETP-01R
Please carefully read the instruction manual before use. Depending
on the model, the image and the actual look of the product may vary.
* Please visit our website
www.intercoax.com
to download Manual.
Installation Guide
1. Connect Ethernet cable (Cat5e or better) from PoE Switch/NVR to
ETP-01R. Check LEDs on ETP-01R.
Ethernet cable
(Cat5e or better)
2-Wire Twisted cable
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
2. Connect single twisted pair cable to ETP-01R.
Connect single twisted pair cable from ETP-01R to ETP-01T.
Ethernet cable
(Cat5e or better)
2-Wire Twisted cable
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
3. Connect Ethernet cable (Cat5e or better) from ETP-01T to IP
Camera (PoE Model Only). Check LEDs on ETP-01T.
Ethernet cable
(Cat5e or better)
2-Wire Twisted cable
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
LED Indicators
Indicator
Color
Function
DATA
Blinking : Ethernet Data Act
PWR
DC Link (PoE or DC Power adapter)
Attention polarity( , ).
Please connect PoE DEVICE ONLY.
IXMETXEN20
