background image

CN565-15 Coil Nailer

Made In China  

DB

Limited Five (5) Year Warranty for

Pneumatic Nailers

Our products are designed and constructed using the highest standards of both mate-

rial and workmanship. We warrant to the original retail purchaser that their nailers will 

be free from defects in material or workmanship for the warranty period of five years.

During the warranty period (which begins on the purchase date), we will repair or 

replace, at our option and expense, any product or part that is defective in materials or 

workmanship after examination by an Authorized Warranty Service Center, subject to the 

exceptions, exclusions and limitations described below. Any replacement product or part 

will carry a warranty for the balance of the warranty period applicable to the replaced 

product or part. A DATED SALES RECEIPT OR PROOF OF PURCHASE FROM THE 

ORIGINAL RETAIL PURCHASER IS REQUIRED TO MAKE A WARRANTY CLAIM. To make 

a warranty claim, you must return the product, with proper receipt/proof of purchase 

and return transportation charges prepaid, to us (your dealer) or an Authorized Warranty 

Service Center. We will perform our obligations under this warranty within a reasonable 

time after approval of the warranty claim.

WARRANTY EXCLUSIONS

The following warranty exclusions apply:

1. Normal wear parts are not covered under this warranty. Normal wear parts 

include, for example, rubber o-rings, seals and driver blades.

2. This warranty does not cover parts damaged due to normal wear, misapplica-

tion, misuse, accidents, operation at other than recommended speeds, improper 

storage, or damage resulting during shipping.

3. Products used in production/industrial applications are excluded from this  

warranty.

4.  Labor charges, maintenance, or loss, damage and repairs resulting from  

improper operation are not covered by this warranty.

GENERAL WARRANTY CONDITIONS

This warranty will be honored, only if:

1. Clean, dry, regulated compressed air has been used at air pressure not exceed-

ing the maximum indicated on the tool casting;

2. No evidence of abuse, abnormal conditions, accident, neglect, misuse or im-

proper modifications or storage of the product exists; and

3. No deviations from following recommended operating instructions, specifi-

cations, and maintenance schedules exist. (Read Operator Manual for use, 

specifications, and maintenance instructions).

This warranty is the only warranty for the product and we disclaim all other warran-

ties. Any implied warranties will be limited in duration to the applicable warranty period 

specified above. Some states do not allow limitations on how long an implied war-

ranty lasts, so the above limitation may not apply to you. Your remedies are solely and 

exclusively as stated above. We shall in no event be liable for incidental, consequential, 

indirect or special damages. Some states do not allow the exclusion or limitation of 

incidental or consequential damages, so the above limitation or exclusion may not apply 

to you. In no event, whether as a result of a breach of contract, warranty, tort (including 

negligence) or otherwise, shall our liability exceed the price of the product that has given 

rise to the claim or liability. Any liability connected with the use of this product shall 

terminate upon the expiration of the warranty period specified above. No employee or 

representative of any distributor or dealer is authorized to make any change or modifica-

tion to this warranty.

This warranty gives you specific legal rights, and you may also have other rights, 

which vary from state to state.

Interchange Brands CN565-15 

Operator’s Manual (10/8/14)

Summary of Contents for CN565-15





















Reviews: