Interactive Technologies SceneStation, User Manual, Page: 65 / 96

SceneStation Installation and Programming Guide Using the Programmer's Remote | 59
Copy Preset
While editing a preset, you can copy the properties of one preset to the preset you
are currently editing.
Press the
COPY button to temporarily switch to the Copy Preset mode. The center
LED on the station will blink White.
Then, enter the two-digit number of the preset you want to copy the data from.
All of the properties of the specified preset (the scene, fade and follow times, loop and repeat and
indicator colors) will be copied to the current preset.
After copying the information, the preset is not saved yet. The station remains in the Preset Edit
mode so you can edit any of the properties before they’re saved. Press ENTER to save the
copied preset and/or your changes. Press CLEAR to cancel the changes and return to the Idle
Mode.
For example, while editing preset 15 you decide that you want to copy the information from
preset 8. Press:
COPY + 8
The station will copy the data from preset 8 into the edit mode.
Then, you want to change the fade time to 3 seconds. Press:
FADE + 3
You can adjust other properties as well. When finished making changes, press ENTER to save
all of the changes. In this example, preset 15 will be equal to preset 8, but have a fade time of 3
seconds.