Working With Remote CueServers
Adding a Remote CueServer
To add a CueServer to the Navigator Window that is “across the Internet” (i.e., not on the local network),
choose
Add Remote CueServer…
from the CueServer Menu, or click the
Add Remote
button (
) in
the toolbar.
The
Add Remote CueServer
window will appear:
The fields in this window are described below:
Address
This field can accept either an IP Address (for example: 50.167.102.1), or a domain name (such as:
mycueserver.dnsalias.com).
Port
This field is used to specify the
port number
of the remote CueServer. If left blank, the default port 80
will be used. Valid port numbers range from 1 to 65535.
To add a remote CueServer (after the fields are filled out properly), click
Add
.
Viewing Remote CueServers in the Navigator Window
Once a Remote CueServer has been added to the Navigator Window, it will appear in the CueServer list
with a small cloud icon (
) next to the status icon. For example:
Interactive Technologies, Inc.
CueServer 2 User's Manual - 18.5.18
Page 19 of 429
