At
Syntax
Command
Description
Return Value
At <value>
Set the value of the selected object(s)
The value the object(s)
were set to
At Cue <cue>
Sets the selected channels to the values in Cue
cue
The number of channels
set
At Playback <playback>
Sets the selected channels to the values in Playback
playback
The number of channels
set
At Input
Sets the selected channels to the values currently
coming from the DMX input
The number of channels
set
At Output
Sets the selected channels to the values currently
being sent to the DMX output
The number of channels
set
At [+/-]<value>
Set the value of the selected object(s) to an offset (or
delta) from the object(s) current value
The value the object(s)
were set to
At ?
Get the value of the selected object(s)
The current value of the
selected object(s)
•
<value>
◦ A percentage from
0
to
100
. When specifying percentages, the value can optionally be followed
by the
%
sign.
◦ A decimal number from
#0
to
#255
. When specifying decimal numbers, the value must be
proceeded with a
#
sign.
◦ A hexadecimal number from
$00
to
$FF
. When specifying hexadecimal numbers, the value
must be proceeded with a
$
sign.
◦
FL
(Full) or
On
can be used as a shortcut that means
100%
◦
Off
can be used as a shortcut that means
0%
◦ A sign
+
or
-
may appear before the value to specify an offset (or delta) from the current value.
•
<cue>
◦ Any whole number from
0
to
99999
◦ May optionally contain decimal numbers from
.00
to
.99
•
<playback>
◦ Any whole number from
1
to
32
Interactive Technologies, Inc.
CueServer 2 User's Manual - 18.5.18
Page 179 of 429
