1. Allgemeines
—
Scape X®
32 AIO
Technical specifications are subject
sx32aio-006
to change without notice.
Operating Manual
Version 1.7 – Status: 05/2020
Page 4 of 26
poc: SFi
1.
Allgemeines
This manual describes the safe installation, configuration and correct operation of the
Scape X®
32 AIO
. If necessary,
pay attention to the supplementary documents, such as the installation instructions.
1.1.
Safety instructions
Before using and operating your
Scape X®
32 AIO
, observe the following safety instructions to prevent you, your
environment or the
Scape X® 32 AIO
from being damaged.
Fire and electric shock
Overloaded sockets, extension cords and power strips can cause fire and electric shock.
·
Avoid using power strips and extension cords if possible.
·
Do not chain multiple extension cords or power strips together.
Overheating
Heat build-up can overheat the screen and the integrated PC. This can damage the device.
·
Ensure there is sufficient air circulation around the
Scape X®
32 AIO
.
·
Make sure all the ventilation holes on around the screen and integrated PC are uncovered.
Excess voltage from lightning strikes
In the event of a thunderstorm there is a risk of excess voltage damage from lightning strikes electrical appliances that
are plugged in.
·
Do not install the
Scape X®
32 AIO
during a thunderstorm.
·
Disconnect the devices from the mains during thunderstorms.
Moisture, liquid and steam
Moisture, liquid and steam inside the
Scape X®
32 AIO
can cause electric shocks or short circuits.
·
Only use the
Scape X®
32 AIO
indoors.
·
Do not allow liquids to get inside the
Scape X®
32 AIO
.
·
Protect your
Scape X®
32 AIO
from steam and moisture.
