Interacoustics Affinity Compact Instructions For Use Manual Download Page 61

Page: 61 / 83

D-0123672-H – 2022/05
Affinity Compact - Instructions for Use - US

Page

General technical specifications

5.1 Affinity Compact

Hardware - Technical Specifications

Medical CE-mark

The CE-mark in combination with MD symbol indicates that Interacoustics A/S

meets the requirements of the Medical Device Regulation (EU) 2017/745

Annex I. Approval of the quality system is made by TÜV – identification no.

0123.

Safety standards

IEC 60601-1 2005 (Third Edition) + CORR. 1 2006 + CORR. 2 2007 +

A1 2012,

AAMI ES60601-1 2005+A2+A1

CSA-C22.2 No.60601-1:14

Class I, Applied parts type B, Continuous operation

EMC standard

IEC 60601-1-2 2014

IEC 60645-1 2017

Calibration

Technical information is in the specifications for the software modules.

Calibration information and instructions are located in the Service manual.

PC requirements

(recommended

minimum)

2 GHz Intel i3 processor

4GB Ram

2.5 GB available disk space

1024x768 resolution (1280x1024 or higher recommended)

Hardware accelerated DirectX/Direct3D graphics card.

One or more USB ports, version 2.0 or higher.

Operating Systems

Windows

8 (64 bit)

Windows

10 (64 bit)

Windows®11 (64 bit)

Compatible software

Noah 4, OtoAccess® and XML compatible.

Input specifications

Talk back

240

Vrms at max. input gain for 0dB VU-reading

Input impedance: 47.5KΩ

Mic. – Talk forward

240

Vrms at max. input gain for 0dB VU-reading

Input impedance: 47.5KΩ

Patient respond

Switches 3.3V to the logic input.

(The switch current is 1.5mA)

AUX

10mVrms at max. input gain for 0dB VU-reading

Input impedance: 68KΩ

Insitu headset ref.

Insitu headset tube.

Max input level before clipping 220mVrms.

calibration by 94 dB SPL 250Hz or 1kHz.

Input impedance: 68KΩ

Max input level before clipping 3800mVrms.

calibration relative to reference microphone.

Input impedance: 33KΩ

Ambient- calibrated

mic.

Max input level before clipping 220mVrms.

calibration by 94 dB SPL 250Hz or 1kHz.

Input impedance: 68KΩ

Required that an Interacoustics microphone is used,

to work

Test box reference

Max input level before clipping 220mVrms.

calibration by 94 dB SPL 250Hz or 1kHz.

Input impedance: 68KΩ

Test box coupler

Max input level before clipping 3800mVrms.

calibration relative to reference microphone.

Input impedance: 33KΩ

Wave files

Plays wave file from hard disk drive

Summary of Contents for Affinity Compact




















































































Search results

Summary of Contents for Affinity Compact

Reviews:

Interacoustics Affinity Compact, Instructions For Use Manual, Page: 61 / 83

Search results

Summary of Contents for Affinity Compact

Reviews: