Interacoustics AD629 Instructions For Use Manual Download Page 13

Page: 13 / 67

D-0133833-A – 2022/09
AD629 - Instructions for Use - EN

Page 10

3.4 Operating instructions

The figure below shows the outline of the front plate of the AD629 including buttons, dials, and display:

The following table describes the functions of the various buttons and dials.

Name(s)/Function(s)

Description

Microphone

For live voice speech and talk forward instruction to the patient in

the test cabin.

Talk back Speaker

For speech feedback from the patient in the test cabin.

Color Display Screen

For displaying the different test screens. Will be further explained

in the sections describing the individual tests.

Tone and Response

Indicator

Indication light seen when a tone is presented to the patient.

Indication light seen when the patient activates the patient signal

using the patient response.

Channel 1

Indicates intensity level for channel 1, e.g.:

(21)

(4)

(3)

(5)

(15)

(16)

(10) (11) (12) (13) (14

(17)

(18) (19) (20)

(22) (23) (24) (25)

(26)

(27) (28)

(29) (30) (31) (32)

(33) (34)

(35) (36)

(37) (38)

(39) (40)

(41)

(43)

(42)

(2)

(6)

(1)

Summary of Contents for AD629




































































Search results

Summary of Contents for AD629

Reviews:

Interacoustics AD629, Instructions For Use Manual, Page: 13 / 67

Search results

Summary of Contents for AD629

Reviews: