Inter-Track IT-R240, User Manual

Page: 7 / 12

7.
Connect the heart rate wire 2 (No.31) with heart rate wire 1
(No.30) ), then put the extra wire plug into the adjustable
bracket (No. 2); With 2 sets of Half-Roundhead Hex bolt
(No.46), spring washer (No.58) ,ARC washer (No.41) &Lock Nut
install the Handlebar support- Left( No.5)& Handlebar support -
Right(No.6) on the adjustable bracket (No.2)
8.
T o adjust the positions of the seat cushion (No.36), just
unscrew the seat cushion to adjust the spring knob (No.34).
After adjusting the
adjustable bracket
(No.2) to the appropriate
position, tighten the spring knob (No.34)
9.
Fasten the Belt (No. 40) on the Pedal (No. 25 ) first, then mount them
on the crank ( No.20). (see figure 9 )
Note: left (L), right (R) are indicated on the foot pedal shaft.
When stamping quickly in one direction, do not immediately kick in the other to
avoid injury.