Inter-Track IT-B240, User Manual

Page: 10 / 14

1.
Load adjustment: resistance fine tuning knob, clockwise rotation, resistance increase, according to your own
needs to adjust the level of resistance.
2.
Adjusting the height of the seat: loosen and pull back the hand screw on the seat cushion cannula, lift or lower the seat
cushion tube to an appropriate position according to the needs of the wearer. Then, the hand screw will be
automatically inserted into the seat cushion tube hole to tighten the hand screw.
3.
When riding a bike, sit on the cushion, fasten the pedal strap and hold the handle with both hands. The upper body can
freely change its position
FUNCTION KEYS/MANUAL MODE:
1. MODE: Push down for selecting functions. If
the
MODE button
is held down for a long time, all
values
will
re
turn
to
0
except the
ODO.
2.
SET: To set the values of time, distance
,
pulse and calories when not in scan mode.
3. RESET : Push down for resetting time, distance & calories, the current data change to 0.
WINDOW DISPLAY
• TIME:
Displays the elapsed using time (0:00
-
99:59 MIN).
• SPEED: The speed range is 0.0 - 999.9KM/H (or Mile/H).
•
DISTANCE: Displays the total distance traveled (0.0 - 9999KM or MILES).
•
CALORIES: Displays total calories burned (0.0 -9999 CAL).
•
PULSE (if have) : Displays your pulse data when hands are placed on the sensors (40 - 240 BPM).
I.
Installation method
1.
Remove the battery door on the back shell of the meter and install two new 1.5V AA batteries in the
positive and negative directions of the battery box (for battery products not installed).
2.
Fix the instrument on the pipe in front of the fitness equipment with screws.
3.
Connect the sensor wire plug with the outlet connector on the back of the instrument or insert the
signal input jack on the back of the instrument.
4.
Quick
step on the fitness equipment and the displayed
speed changes
indicate that the installation
is qualified; otherwise, check whether the magnet seat and the sensor are installed correctly and
whether the sensor wire plug and the lead wire of the watch head are connected reliably.