Inter-Tel INT2000, User Manual, Page: 19 / 48

Inter-Tel INT2000 User Guide
13
User-Programmable Feature Buttons
Depending on how your system is programmed, some of your feature buttons
may be designated as “user-programmable.” If so, you can program them
with any of the feature codes listed on the back of this user guide. (Station
Speed-Dial buttons require special programming, as described in the last sec-
tion below.)
To program a user-programmable feature button:
1. Dial 3 9 7 .
2. Press the feature button you want to program.
3. Dial the feature code you want to store under that button. (Refer to the
back of this guide for default feature codes.)
To return all feature buttons to their original default values:
Dial
3 9 5
.
To display the current feature button values:
1. Dial
3 9 6
.
2. Press the feature button(s) you want displayed.
3. Press TALK to hang up.
To change a user-programmable feature button into a Station Speed-Dial
button:
1. Dial
3 9 7
.
2. Press the feature button you want to change into a Station Speed-Dial
button.
3. Dial 3 8 2 .
4. When the display asks for a number, dial a digit 0–9. This is the station
speed-dial number “location.”
5. Label the corresponding button on your INT2000 with the station speed-
dial location number (0–9) and the extension number or outside tele-
phone number that will be stored there. You can now use the procedure
outlined on page 24 to program and use the Station Speed-Dial button.