GETTING S
T
AR
TE
D
23
Eclipse Associate Display and Basic Digital Phone User Guide
U
SING
A
H
EADSET
With an electret headset, you can talk on the phone handsfree, without using your
speaker and microphone.
NOTE:
If your headset has a power-saver mode, make sure the System Administrator
has the Headset Connect Tone flag enabled in the telephone system. If this flag is
not
enabled, you may miss the first few seconds of incoming calls.
To connect a headset:
1.
Unplug the coiled handset cord from the base of the phone. (Leave the handset in
the cradle.)
2.
Insert the headset plug into the vacant handset jack.
3.
While on-hook, enter the Headset On feature code (
) or the Headset
On/Off feature code (
). Display phones will show HEADSET MODE
ON.
To disconnect a headset:
1.
Unplug the headset cord from the base of the phone.
2.
Plug the coiled handset cord into the vacant jack.
3.
While on-hook, enter the Headset Off feature code (
) or the Headset
On/Off feature code (
). Display phones will show HEADSET MODE
OFF.
NOTE:
If using a headset, press
SPKR
to connect and disconnect calls.
3
1
5
3
1
7
3
1
6
3
1
7
