59
Inter-Tel
®
Standard/Basic Endpoint User Guide
MOVING ON
P
ERFORMING
A
“H
OOKFLASH
” D
URING
A
C
ALL
Certain telephone service companies may require a timed hookflash (a quick hang up
and release).
To generate a hookflash while using a line:
Press
and
dial
.
NOTE:
This features is known as a “Recall” in European systems.
P
ROGRAMMING
Y
OUR
F
EATURE
B
UTTONS
Depending on how your system is programmed, some of your feature buttons may be
“user-programmable.” If so, you can program them with any of the feature codes
listed in the back of this user guide. In addition, you can combine the feature button
and Station Speed-Dial functions to program a feature button to dial an outside num-
ber.
NOTE:
You cannot program secondary extension buttons as feature buttons (see
).
To program a user-programmable feature button:
1.
With the handset in the cradle, dial
.
2.
Press the feature button you want to program.
3.
Dial the feature code or extension number you want to store under that button.
(Refer to
for default feature codes.)
To return all feature buttons to their original default values:
With the handset in the cradle, dial
.
To display the current feature button values:
1.
With the handset in the cradle, dial
.
2.
Press the feature button(s) you want displayed.
3.
Press
to hang up.
∞
3
3
0
3
9
7
3
9
5
3
9
6
SPKR
Summary of Contents for Basic Digital Endpoint
