manualshive.com logo in svg

Inter-Tel Basic Digital Endpoint, User Manual

Share
Download
Inter-Tel Basic Digital Endpoint User Manual Download Page 103

91

Inter-Tel

®

 Standard/Basic Endpoint User Guide

LEAR

NIN

G

 MORE

F

REQUENTLY

 A

SKED

 Q

UESTIONS

 (FAQ

S

)

This section includes some of the most frequently asked questions. If you have prob-
lems with your endpoint or mailbox, refer to this section before you contact your sys-
tem, voice mail, or network administrator or your local Inter-Tel provider.

Q1.

How can I retrieve messages if I don’t know the password for my voice mail?

A1.

Try using your extension number, which is your default password. Or, maybe you
don’t have a password, in which case pressing 

 is all you need to do. If these

options don’t work, contact your system administrator, who can change or erase the
password for you. You can then retrieve your messages and reset the password, if
desired (see 

page 47

).

Q2.

How do I change the time and date on my endpoint (display endpoints only)?

A2.

Only your system administrator can change the time and date. Contact your system
administrator if you notice that the date and time are incorrect.

Q3.

How do I program System Speed-Dial numbers?

A3.

Only your system administrator can program System Speed-Dial numbers. You can,
however, program up to ten Station Speed-Dial numbers (see 

page 54

).

Q4.

How can I set the number of rings that are allowed before the call is sent to voice
mail?

A4.

Only your system administrator can change the number of rings.

Q5.

How can I change the name displayed on my endpoint (display endpoints only)?

A5.

Only your system administrator can change the usernames assigned to extensions.

Q6.

Why can’t I retrieve deleted messages?

A6.

The system may have erased your message. After a programmed amount of time has
lapsed, up to 24 hours, the system automatically erases all deleted voice mail mes-
sages (see 

page 36

). If you attempted to recover a deleted voice mail message within

this time frame but you were still unsuccessful, your voice mail system may not have
sufficient space programmed to store deleted messages. Or, your telephone system
may not be using a software version that supports this feature. If you are attempting to
recover a deleted e-mail or fax message (E-Mail Reader enabled) contact your voice
mail administrator to see how long you have to recover deleted e-mail and fax mes-
sages.

Q7.

How do I scroll the display screen (display endpoints only)?

A7.

Press the low end of the volume button to scroll down or the high end of the volume
button to scroll up.

#

Summary of Contents for Basic Digital Endpoint























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands