Inter-Tel
AXXESS, User Manual

Page: 27 / 90

GETTING S
T
AR
TE
D
17 Axxess Executive Display Phone User Guide
P
LACING
C
ONFERENCE
C
ALLS
With the Conference feature, you can establish a conference call with up to three
intercom and/or outside parties (four, including you).
To place a conference call:
1. While on the first call, press or the
CNF
menu key to put the call on
hold.
2.
Place another intercom or outside call.
3.
Press or the CNF menu key to place the call on hold. (If necessary, repeat
this step to place one more call on hold.)
4. Press or the
CONNECT TO CONFERENCE
menu key to join all of
the calls together in the conference.
During the conference call, you can do the following:
•
To place the conference on hold: Press the
HOLD
menu key. This places the con-
ference on hold without disconnecting the parties. To return to the conference,
press .
•
To drop out of the conference: Press and hang up. This removes your
phone from the conference, but leaves the other parties connected.
•
To add additional parties to the conference: Do the following:
a. Press the
ADD PARTY
menu key. This leaves the conference parties con-
nected.
b. Place a call to the party to be added to the conference.
c. EITHER, Press twice.
OR, Press once, and then press
CONNECT TO CONFERENCE
.
You and the new party are added to the conference.
•
To end the conference and place all parties on individual hold: Press and
then press to place all of the parties on individual hold. You can then
speak to one party at a time by pressing or a flashing key.
•
To mute your microphone: Press or the
MUTE
menu key. This turns your
microphone on or off during the conference. If mute is enabled, you can hear the
conferenced parties, but they cannot hear you.
•
To transfer the conference to another extension or to voice mail: Press or
the
TRANSFER CNF
menu key and dial the desired extension number. Then
hang up when you are ready to complete the transfer.
CNF
CNF
CNF
CNF
CNF
CNF
CNF
CNF
HOLD
HOLD
MUTE
TRANSFER