background image

54

MO

VING O

N

Axxess

®

 Model 8620 Phone User Guide – Axxess IP Mode

U

SING

 A

CCOUNT

 C

ODES

If your telephone system is programmed to use the Station Message Detail Recording
(SMDR) feature, you might be required to enter account codes when you place a call.
These codes add information to phone record reports that the system will periodically
print.
There are three types of account codes: 

Standard account codes are automatically entered into the SMDR report when-
ever you place a call.

Forced account codes must be dialed before you can place an outside call.

Optional account codes can be entered at any time during a call. 

NOTE: 

Your system administrator can tell you which types of account codes are used

on your telephone system.

To enter an optional account code:

1.

Press 

 and dial 

    .

2.

Enter the optional account code. If the account code is not immediately accepted,
press .

To set an account code for all calls placed from your phone:

Dial 

   

 and then the account code. If the account code is not immediately

accepted, press 

. This code will be used for all calls made from your phone until it

is disabled.

To disable the code: 

Dial 

   

 and press 

.

3

9

0

#

3

9

1

#

3

9

1

#

Summary of Contents for AXXESS 8620

























































































Reviews: