Inter-Tel Axxess 8500 User Manual Download Page 57 | Manualshive

Page: 57 / 108

Inter-Tel Axxess 8500 User Manual Download Page 57

45

Inter-Tel

®

Model 8500 User Guide

MOVING ON

S

ETTING

M

AILBOX

P

REFERENCES

Your mailbox contains personal options to allow you to customize voice mail func-
tions. However, before you change your voice mail options, you must first initialize
your mailbox (see

NOTE:

If your telephone system uses Enterprise Messaging (EM), your mailbox may

have the Automatic Speech Recognition (ASR) feature enabled. When ASR is enabled
for your mailbox, you have the option of issuing a spoken command or pressing a dial-
pad button. See

for ASR guidelines.

ALSO:

If your mailbox has E-Mail Reader enabled, you have an advanced mailbox.

for information and instructions about using E-Mail Reader features.

Changing Your Mailbox Password

Your password prevents unauthorized access to your mailbox. When you first initial-
ize your mailbox, you are prompted to change your password from the default (your
mailbox number).
You can change your mailbox password at any time. The new password can be up to
12 digits long and must be numeric.

To change your mailbox password:

1.

Access your mailbox as described on

2.

Say “Personal” or press

to select the Personal Options Menu.

3.

Say “Password” or press

.

If you want a password,

enter a new password using dialpad buttons 0-9 (up to 12

digits), and then press

when you are done. The messaging system plays back

your password.

If you do not want to use a password,

just say “Skip” or press

.

4.

Say “Accept” or press

to accept the password as entered or say “Re-enter” or

press

to erase and re-enter your password.

5.

Hang up.

4

3

#

#

#

3

«
...
55
56
57
58
59
...
»

Summary of Contents for Axxess 8500













































































































Reviews:

No comments