manualshive.com logo in svg

Inter-Tel Axxess 8500, User Manual, Page: 9 / 108

Share
Download
Inter-Tel Axxess 8500 User Manual Download Page 9

Notice

This Inter-Tel

® 

user guide is released by Inter-Tel, Inc. as a guide for end-users. It pro-

vides information necessary to use the Model 8500 endpoint. The contents of this user
guide, which reflect current Inter-Tel standards, are subject to revision or change without
notice. Some features or applications mentioned may require a future release and are not
available in the initial release. Future product features and applications are subject to
availability and cost. Some features or applications may require additional hardware and/
or specific software.

Some system features can only be accessed by an

administrator. For information about these features, see the 

Frequently Asked Questions on page 83.

For sales, service, or technical support,

contact your local authorized Inter-Tel provider.

Comments about this user guide or other

technical documentation should be directed to

Inter-Tel’s Technical Publications Department at:

[email protected]

All products and services mentioned in this publication are the trademarks, service marks,
registered marks, or registered service marks of their respective owners.

Inter-Tel

®

, Axxess

®

, and Enterprise

®

 are registered trademarks of Inter-Tel, Incorpo-

rated.
Microsoft

®

 and Outlook

®

 are registered trademarks of Microsoft Corporation.

Summary of Contents for Axxess 8500













































































































Reviews:

No comments