Inter-Tel Analog Endpoint, User Manual

Page: 80 / 116

68 Inter-Tel
®
Analog Endpoint User Guide
MOVING ON
Remote Feature Access
To access your endpoint from another endpoint:
1.
EITHER, Call your Direct Inward System Access number (provided by your
system administrator). If required, enter your password.
OR , Use any endpoint on the system.
2.
Enter .
3.
Enter your extension number.
4.
Enter your password followed by . You can now use any of the following fea-
tures.
To change the station password using Remote Programming:
a.
Enter .
b.
Enter the new password, followed by .
c.
Enter the new password again for verification, followed by .
To turn on DND:
a.
Enter .
b.
Enter the message number (01-20) and enter the optional second-line mes-
sage text.
To turn off DND: Enter .
To turn on Call Forward:
a.
Enter one of the following Call Forward feature codes.
All Calls
.......................
If No Answer
................
If Busy
.........................
If No Answer or Busy
.....
b.
Enter an extension number or enter an outside line access code followed by a
telephone number.
To turn off Call Forward: Enter .
5.
Hang up.
3 5 9
#
3 9 2
#
#
3 7 0
3 7 1
3 5 5
3 5 6
3 5 7
3 5 8
3 5 5